OEM & MRO Engine Components

Maskants for Aerospace OEM & MRO Engine Components

Maskants for Aerospace OEM & MRO Engine Components

At Dymax, we understand the many challenges brought upon the aerospace and defense industry. Our light-curable conformal coatings and maskants address many challenges throughout avionics, engine - OEM and MRO, and rotorcraft sectors.

Product Number

Product Description

Regional Availability

707
This temporary maskant is hard, durable, and provides excellent internal cavity protection during laser drilling operations. This product cures upon exposure to UV/Visible light and has a secondary heat-cure to address shadow areas. The material is 100% organic, cures quickly, and is easily removed by incineration at a minimum 650°C.
718
Light-curable thermal sprayable maskant with excellent surface and cavity protection during APS and HVOF. This fast-curing thixotropic gel exhibits high adhesion and resists flame-spray processes. Maskant is easily removed by incineration.
724
Clear, low adhesion, easy-peel surface treatment maskant with good surface protection properties. When properly cured with UV/Visible light energy, the maskant leaves no residue on the surface of the substrates
729
UV light-curable masking resin provides excellent surface and cavity protection of turbine components during acid stripping, high-temperature plating processes, and other harsh chemical operations. This 100% organic resin cures quickly with proper UV energy exposure and is easily removed by incineration.
7701
Rapid UV-curable maskant with moderate adhesion for surface protection. This product remains flexible at higher temperature processes. This maskant cures upon exposure to UV/Visible light and is easily removed with a hot-water soak, leaving no residue on non-porous sufaces.
728-G
Highly visible green maskant with good surface protection during plating and aggressive grit blasting, shot-peening, and anodizing processes. 100% organic, this thixotropic gel cures upon exposure to UV/Visible light and easily removed by peeling after a hot water soak.
728-G-LV
High adhesion, acid-resistant, green maskant for plating and aggressive grit blasting processes. This product cures upon exposure to UV/Visible light and is easily removed after a hot water soak or ultrasonic bath.
730-BT
UV/Visible light-curable, 100% organic blue maskant provides excellent surface protection during chemical milling and harsh-environment processing. This material is impervious to most acid and alkali solutions. When used as a temporary protective coating, the product replaces environmentally hazardous and time-consuming solvent- or water-based maskants
731-REV-A
Bright yellow, fluorescing maskant with excellent surface protection during vibratory finishing, plating, shot-peening, anodizing, and aggressive grit blasting. This 100% organic thixotropic gel exhibits high adhesion, and cures quickly. The masking resin is trimmable after cure, is easily peeled off with a hot-water soak and leaves no residue on surfaces when properly cured.
733-G-REV-A
UV-curable, green thixotropic gel maskant is sprayable onto components and resilient to blasting media. This maskant is a 100% organic masking resin that cures quickly and is easily removed by incineration.
734-BT
UV/Visible light-curable blue maskant provides good surface protection during harsh chemical environment processes. This product is impervious to most acid and alkali solutions. The masking resin is trimmable after cure and can be peeled off.
740-BT
Low adhesion, flexible blue maskant with good surface protection against paint, low-pressure grit blasting, shot peening, and general handling applications. The product cures upon exposure to UV/Visible light and is easily removed by peeling, leaving a residue-free surface on non-porous surfaces.
7502
UV/Visible light curable protective resin cures on demand, saving under-the-hood-aluminum components in vehicles from corrosive fluids, moisture, and salt.
706
UV light-curable acid stripping and thermal spray maskant with excellent surface and cavity protection. High viscosity, 100% organic, sprayable thixotropic gel provides high adhesion and removes via incineration.
750-SC
High-temperature maskant with color change from purple to pink upon cure. This maskant provides excellent surface protection during higher temperature thermal spray coating, plasma spray, HVOF, and aggressive grit blasting processes. This 100% organic resin cures upon exposure to UV/Visible light and is easily removed by incineration.

Need help, use the product finder

Use our formulated product finder to help you find the right material. Interested in learning more or have questions? Contact Us, we want to hear from you.

Back to top