Dispensing Equipment
Dymax manual and automated fluid dispense systems and spray valves are easily integrated into existing manufacturing processes for easy application of coatings, lubricants, or masking resins.
E-Mobility
UV Light Curing Materials For E-Mobility
Protecting electric vehicle battery systems from harsh environments has become more critical as the appeal for fully electric and hybrid vehicles grows. Dymax light-curable materials ensure the battery maintains its performance under temperature changes and corrosive elements like moisture, salt, and sulfur.
The UV light-curing conformal coatings, potting materials, encapsulants, and form-in-place gaskets cure in seconds using UV/Visible light, resulting in faster processing and increased throughput. Our materials have no solvents added and are one-part, requiring no mixing or prep before application. Most products are available in multiple viscosity grades as well.
Suitable for applications using cylindrical, pouch, or prismatic battery designs, as well as applications involving electrical components inside charging stations.
Features
- IPC-CC-830 approved (some products)
- MIL-I-46058 listed (some products)
- UL self-extinguishing grades are available
- Fluorescing technology to confirm cure (some products)
- Conformal Coatings with secondary heat or moisture cure available
- Potting materials excellent resistance to chemicals and thermal shock
- Encapsulants with secondary moisture cure
- Form in place gaskets that will conform to complex shapes
UV Light Curing Materials For E-Mobility
UV Light Curing Materials For E-Mobility
As demand for clean and efficient transportation rises, Dymax light-curable materials play an increasingly important role in ensuring reliable and high-performance electric vehicle (EV) batteries. Dymax products can be used to bond, seal, pot, or coat electric battery components to ensure top performance, functionality, and long service life.
Product Number
Product Description
Regional Availability
9801
LED or UV/Visible light and heat-curable camera module adhesive. This product has superior adhesion properties, moisture and thermal resistant, and meets stringent low-shrinkage requirements.
9037-F
Resilient chip encapsulant and wire bond adhesive designed for applications where a thixotropic, high-viscosity encapsulant or a damming material is required. This product cures with UV/Visible light and features a secondary heat cure to address shadow areas. This material has great flexibility, provides high moisture and thermal resistance, and fluoresces blue.
9803
9803 optical epoxy adhesive for camera module assembly cures with LED light, Ultraviolet light, or heat.
9309-SC
Color-changing reinforcement adhesive for edgebonding and CSP reinforcement. This product cures upon exposure to UV/Visible light to quickly ruggedize PCB components.
9-20557
Fluorescing conformal coating designed for rapid coating of PCBs and other electronic assemblies with coating thicknesses between 51 mic [0.002 in] and 510 mic [0.020 in]. This coating cures upon exposure to UV/Visible light and features a secondary heat cure to address shadow areas. UL 94 Flammability V-1 rating.
9483
High-performance conformal coating that cures tack-free upon exposure to UV/Visible light and then over time with ambient moisture. This product fluoresces bright blue, exhibits excellent corrosion, chemical resistance, and thermal cycling properties. The coating is easily applied from 2-8 mils (0.002 in – 0.008 in) thick to meet the requirements of most automotive PCB designs. UL 94 Flammability V-0 rating.
9-7001
PCB protective maskant with color change upon cure provides one-layer protection with a rack free cure up to 0.5 in [12.7 mm]. This maskant is compatible with gold and copper connector pins and resists solvent-based conformal coatings and primers. For enhanced visibility, this product dispenses pink, transitions to clear upon cure, and features a blue fluorescing tracer.
9014
Room temperature stable encapsulant and wire bond adhesive with a secondary moisture cure. This product provides good moisture and corrosion protection of critical components found in electronic applications such as electric vehicle battery management systems.
9-20479-B-REV-A
Blue PCB protective maskant. This UV-curable maskant is compatible with gold and copper connector pins. The product is easily removable, eliminating the concern of ionic contamination or silicone left behind by other methods.
6-621-VT
Industrial adhesive designed for coil winding, metal-to-glass bonding, and potting. This product cures with UV/Visible light, heat, or pre-applied activator.
9501-F
Dymax 9501-F is a UV/Visible light-curing adhesive optimized for LED curing at 385nm designed for electric vehicle battery potting and bonding. It provides a highly reliable bond for cylindrical cells to the base of the battery pack.
Product Number
Product Description
Regional Availability
9906-AA
Dymax 9906-AA is an active alignment epoxy adhesive that is heat and/or LED light-curable.
9482
Fluorescing conformal coating designed for superior circuit protection with coating thicknesses up to 0.254 mm (0.010 in). This product cures with UV/Visible light first, then over time with a secondary ambient moisture cure. UL 94 Flammability V-0 rating.
9481-E
Formulated to ensure complete cure on high-density PCBs where shadow areas are a concern. This product is optimized for coating thicknesses between 25 mic [0.001 in] and 127 mic [0.005 in] and excels in coating applications where chemical and abrasion resistance is critical. The material cures upon exposure to UV/Visible light and features a secondary moisture cure. UL 94 Flammability V-0 rating.
Need help, use the product finder
Use our formulated product finder to help you find the right material. Interested in learning more or have questions? Contact Us, we want to hear from you.
