How to Rework & Remove Conformal Coatings

Tech Tip - Conformal Coating Rework and Removal

Conformal Coating Rework & Removal

Conformal coatings were originally developed for military, aerospace, and marine applications but have been increasingly used in a broader base of telecommunication, computer, automotive, consumer, industrial, and instrumentation applications to increase product quality and performance.

Even though conformal coatings are excellent protective materials they can also suffer from defects that affect their performance including air bubbles, cracking, delamination, de-wetting, pinholes, and tin whiskers. As a result PCB rework may be necessary for high-value boards.

Conformal coatings should be removable with minimal to moderate effort and easily repairable off-line. Ease of rework and removal are linked to the resilience of a coating to specific factors in the operating environment. Light-cure coatings offer high resistance to heat, abrasion, and chemicals, and may be considered more difficult to remove. Easier rework coatings are less resistant to heat, abrasion, and chemicals. 

Rework & Removal Methods

Three techniques are typically used to remove cured, cross-linked conformal coatings including mechanical, thermal, and chemical methods. It’s important to consider the effect of the rework/removal method on solder masks, components, and assembly materials prior to choosing the method.

Mechanical Removal

Scraping or cutting the conformal coating may be an option for some applications and is easier with thicker, more flexible coatings. Pressurized abrasive systems are often used to safely remove cured coatings. The abrasive is easily removed from the surfaces without danger to the components or to the reworking process. This technique is fast, cost-effective, and environmentally clean. It also enables you to selectively remove the coating from a specific targeted area, while causing no damage to the surrounding components.

 

A lab tech uses a plastic tool to remove a cured conformal coating on a printed circuit board.

 

Thermal Heat Removal

Two techniques are possible to remove cured conformal coatings depending upon the temperature sensitivity of the components located on the printed circuit board. These include heating the entire board to strip the coating at once or using a hot-air de-soldering tool or a solder gun to remove spot coatings.

Chemical Removal

Chemically removing cured conformal coating requires treating localized areas or immersing the coated board with a chemical stripping solution.

The chart below illustrates four methods of reworking conformal coatings.

 

There are 4 types of rework processes for repairing high-value conformally coated printed circuit boards.

Want additional information on light-cure conformal coatings? Download our selector guide.

Back to top