BlueWave MX-MIM Machine Interface Module

Utilizes PROFINET or EtherNet/IP Protocols to Independently Drive Emitters

CE Marked – Available Globally

Dymax BlueWave® MX-MIM machine interface module is designed for machine builders and automated equipment using the PROFINET and EtherNet/IP network protocols. These two protocols allow machine builders to greatly reduce I/O channels and free up analog control cards compared to traditional analog- and digital-relay-logic PLC control systems.

Incorporating the BlueWave MX-MIM into automated light-curing systems allows machine builders to independently power up to four Dymax MX-Series emitters at the same time in flood or light-bar patterns. Emitters can be synchronized together to act as one for higher throughput or to create a larger cure area. Compatible with:

  • BlueWave® MX-150 spot lamp
  • BlueWave® MX-250 flood lamp
  • BlueWave® MX-275 light bar

Compatible with BlueWave MX-150, MX-250, and MX-275 emitters with firmware version 1.11 or higher. Dymax can easily upgrade emitter firmware to the latest versions by returning your emitter to one of our service facilities. 



  • Advanced monitoring and diagnostics for systems, controllers, and emitters
  • Integrated web browser for set-up and monitoring
  • Simplified wiring and I/O
  • Independent safety interlocks that are not reliant on firmware
  • Mountable on a standard 35-mm DIN rail
  • Interconnect cables for multi-station or remote placement (2-, 5-, 10-, and 20-meter lengths)



System Specifications

Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.

Get in touch
Property Specifications
Power supply input 24 VDC ± 1% @ 10A Min (300W supply recommended)
Emitter channels Supports up to four MX-series emitters
Network interface One 10/100 base-T Port. Supports EtherNet/IP, and PROFINET.
Note: Device Level Ring (DLR) is not supported
Physical Dimensions 4.96 in H x 7.32 in W x 3.50 in D [ 12.59 cm x 18.59 cm x 8.89 cm]
Mounting DIN Rail; 35-mm top-hat style
Weight 2.035 lbs. [0.923 kg]
Cooling Internal fan, no filter
Operating environment Indoor use only. Not qualified for outdoor use. Ambient temperature +10 to +40°C 0-80% relative humidity, non-condensing at sea-level
NOTE: This device is designed to operate in a typical production environment where dust particulates and harmful vapors are kept to a minimum. Cabinet air filtration is suggested to prevent dust accumulation.
Storage conditions -20 to +50°C, 0-75% relative humidity, non-condensing, at sea level

Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.

Get in touch

Part Numbers

Build a complete solution or find replacement parts for your project

Limited quantities, please submit RFQ for pricing and availability.


Machine interface module only.

Emitters, interconnect cables to connect controller to emitters, and power supply sold separately.

Global (CE Marked)


10-Meter Interconnect Cable Assembly



20-Meter Interconnect Cable Assembly



Clearance - Interconnect Cable Assembly - 2 meter

Limited quantities, please submit RFQ for pricing and availability. 


Customer Supplied

Customers must provide their own 24 Volt DC power supply based on the following specifications:

  • 24 volts at 10 amps minimum supply (300 watts suggested)
  • 1% voltage tolerance
  • CE-marked units recommended to assure performance is in line with the BlueWave® MX-MIM

Dymax equipment service experts

Equipment Services

Our experts can provide information about proper equipment care, maintenance, and help you find the right piece of equipment

Learn more
Back to top