We are only accepting applications through verified recruitment websites listing our job postings (i.e. LinkedIn, Workable, Indeed, etc). Dymax will only contact potential candidates from email addresses ending in @dymax.com.
Available Globally (Except Europe)
The Dymax 5000-EC Series UV curing flood lamps are designed for high-intensity, rapid UV curing of UV adhesives, UV coatings, and UV inks. 5000-EC UV curing lamps are designed for processes requiring higher-intensity UV light concentrated in a narrow 5 in x 5 in area. The 5000-EC series UV flood lamps deliver concentrated light primarily in the UV-A range (320-390 nm wavelength) to achieve maximum UV cure depths and “tack-free” cures, typically in 10-30 seconds. Dymax UV flood lamps provide low-cost cures for bonded or coated areas larger than 1/2 inch2 or can be used for small batch processing or conveyor-mounted UV curing.
The faster curing capability of the 5000-EC UV flood lamp systems gives them the additional ability to cure UV conformal coatings. They are also used for a variety of UV bonding, UV potting, UV sealing, UV tacking, and UV encapsulating applications within the industrial, automotive, electronic, medical device, and optical industries.
The 5000-EC UV curing flood lamp consists of a power supply, reflector housing, and 400 Watt metal halide UV curing bulb. Accessories can be ordered with or retrofitted to the UV curing lamp after purchase, including shutter assemblies, UV shields, and UV flood lampstands. Complete UV flood systems are also available.
Take advantage of the opportunity to evaluate our light-curing systems for two weeks free of charge through our Try-and-Buy program.
Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.
Get in touchProperty | Specifications |
---|---|
Output Power | 400 Watts |
UV Light Source | UVA flood |
Typical Intensity in the UVA range (320-390 nm)* | 225 mW/cm² |
Dimensions of Illuminated Area | 5 in x 5 in [12.7 cm x 12.7 cm] |
EC Input Power Requirements | Universal 90-265 VAC (grounded), 47-63 Hz |
Power Supply Weight | 12.25 lbs. [5.6 kg] |
Power Supply Dimensions (approximate) | 12 in L x 16 in W x 4.25 in H [30.5 cm x 40.6 cm x 10.8 cm] |
Reflector Housing Dimensions (approximate) | 6.75 in L x 6.75 in W x 8 in H [17.2 cm x 17.2 cm x 20.3 cm] |
Reflector Housing Weight | 2.7 lbs [1.2 kg] |
Operating Environment | 10-40°C |
0-80% non-condensing | |
* | Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer, measured three inches from the bottom edge of the reflector housing. |
Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.
Get in touchBuild a complete solution or find replacement parts for your project
Limited quantities, please submit RFQ for pricing and availability.
5000-EC Modular (power supply, reflector housing, bulb)
5000-EC Modular with Light Shield
5000-EC Modular with Light Shield and Zip™ Shutter
5000-EC Modular with Light Shield and Manual Shutter
Clearance - 5000-EC Modular with Light Shield and Zip™ Shutter
Limited quantities, please submit RFQ for pricing and availability.
Manual Shutter for EC and ECE Floods
Most cost-effective shutter system.
ZIP™ Shutter for EC Floods
Timed and manual modes. Foot pedal or PLC controlled.
EC Flood Light Shield
360◦ shielding with lifting door and sliding curing shelf.
Compatible with Dymax Shutters (Part # 37863, #35572).
ACCU-CAL™ 50 for Spot and Flood Lamps and Conveyors
Includes storage/carrying case
ACCU-CAL™ 50 for Flood Lamps and Conveyors
Includes storage/carrying case