We are only accepting applications through verified recruitment websites listing our job postings (i.e. LinkedIn, Workable, Indeed, etc). Dymax will only contact potential candidates from email addresses ending in @dymax.com.
Available Globally (Except Europe)
The Dymax 1200 Series focused beam UV curing flood lamps use high-intensity UV/Visible light for the rapid curing of UV adhesives, UV coatings, and UV inks. A Dymax 1200-EC UV flood lamp delivers broad-spectrum light concentrated primarily in the UV-A range (320-390 nm wavelength) to achieve maximum cure depths and tack-free cures, typically in 10-30 seconds. Dymax 1200-EC UV flood lamps are specifically designed for applications requiring high-intensity UV light concentrated in a narrow 1 in x 6 in beam.
1200-EC focused beam UV curing lamps provide low-cost cures for bonded or coated areas larger than 1/2 inch and can be used for UV curing trays of small parts or parts arranged in a linear configuration. They are used for a variety of UV bonding, UV potting, UV sealing, UV tacking, and UV encapsulating applications within the industrial, automotive, electronic, medical device, and optical industries.
The 1200-EC UV curing flood lamp consists of a power supply, reflector housing, and 400 Watt metal halide UV curing bulb. Accessories can be ordered with or retrofitted to the UV curing lamp after purchase, including shutter assemblies, UV shields, and UV flood-lamp stands. Complete UV flood systems are also available. UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems.
Take advantage of the opportunity to evaluate our light-curing systems for two weeks free of charge through our Try-and-Buy program.
Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.
Get in touchProperty | Specifications |
---|---|
Output power | 400 Watts |
UV light source | Unfiltered full spectrum UV focused beam light |
Typical intensity in the UVA range (320-390 nm)* | 350 mW/cm² |
Dimensions of illuminated area | 1 in x 6 in [2.5 cm x 15.2 cm] |
EC input power requirements | Universal 90-265 VAC (grounded), 47-63 Hz |
Power supply weight | 12.25 lbs. [5.6 kg] |
Power supply dimensions (approximate L x W x H) | 12 in x 16 in x 4.25 in [30.5 cm x 40.6 cm x 10.8 cm] |
Housing dimensions (approximate L x W x H) | 9 in x 10.5 in x 7.5 in [22.9 cm x 26.7 cm x 19.1 cm] |
Housing weight | 3.4 lbs [1.5 kg] |
Operating Environment | 10-40°C |
0-80% non-condensing | |
* | Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer, measured 4.5″ from the bottom edge of the reflector housing. |
Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.
Get in touchBuild a complete solution or find replacement parts for your project
Limited quantities, please submit RFQ for pricing and availability.
1200-EC Modular with Light Shield
1200-EC Modular with Mounting Stand
Manual Shutter for EC and ECE Floods
Most cost-effective shutter system.
ZIP™ Shutter for EC Floods
Timed and manual modes. Foot pedal or PLC controlled.
EC Flood Light Shield
360◦ shielding with lifting door and sliding curing shelf.
Compatible with Dymax Shutters (Part # 37863, #35572).
Clearance - 1200 & 2000 Mounting Stand Kit. Compatible with 1200-EC, 1200-PC, 2000-EC, 2000-PC, and ECE 2000 UV Flood Lamps.
ACCU-CAL™ 50 for Spot and Flood Lamps and Conveyors
Includes storage/carrying case
ACCU-CAL™ 50 for Flood Lamps and Conveyors
Includes storage/carrying case