Multi-Cure® UV-Curable Encapsulant & Potting Resin
Dymax Multi-Cure® 9001-E-v3.1 encapsulant cures in seconds to enhance moisture, thermal cycle, and abrasion resistance of electronic and microelectronic assemblies. This material offers adhesion to various component substrates. The product provides optimal coverage over difficult circuit geometries. 9001-E-v3.1 encapsulating material has high ionic purity, is solvent free, and isocyanate free. This encapsulant has been engineered to have a low modulus and low Tg to minimize stress on delicate wire bonds. Material exposed to light will cure in seconds, while any shadowed areas will cure upon heat exposure. 9001-E-v3.1 Visible/UV light-curable encapsulant is formulated for fast on-demand cure with the Dymax BlueWave® UV light-curing systems.
9001-E-v3.1 encapsulant is especially well suited for chip-on-board, chip-on-flex, multi-chip modules, as well as wire bonding.
Dymax materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. Multi-Cure® 9001-E-v3.1 is in full compliance with the RoHS2 Directives 2015/863/EU.
Viscosity (nominal): 4,500 cP
Cured Appearance: Clear
Substrates: Ceramic; Leadframe; PCB; Flex; Silicon
- Multi-chip modules
- Wire bonding
- Bare die encapsulation
- UV/Visible light cure for fastest processing
- LED light-curable
- Secondary heat cure for shadowed areas
- One part, no mixing is required
- Solvent free, Isocyanate free
- Low Tg, low modulus for wire bonding