Dispensing Equipment
Dymax manual and automated fluid dispense systems and spray valves are easily integrated into existing manufacturing processes for easy application of coatings, lubricants, or masking resins.
Conformal Coatings for Consumer Electronics
Conformal Coatings for Consumer Electronics PCB Protection
Dymax conformal coatings for printed circuit board (PCB) assembly for consumer electronic applications cure in seconds upon exposure to UV/Visible light, helping to streamline manufacturing processes. Apply, cure, and ship immediately! Eliminate the time-consuming steps of traditional thermal-cure and room temperature-cure technologies.
The products are electrically insulated so they can be applied over the entire PCB surface or in select areas to provide protection from service environments.
Circuit board conformal coatings contain low VOCs, eliminating the need for solvent handling while enhancing worker safety and minimizing environmental impact. Each product is one part (no mixing required) for easy dispensing.
For customers in the U.S. and Europe who need contract manufacturing for their electronics applications, Electronic Coating Technologies is a premier partner to Dymax and leading provider of coating services. Not available in Asia.
Features
- Cure with LED or UV/Visible Light
- Complete cure in seconds
- Excellent adhesion to glass, Kapton, PMMA, ceramic, silicon, lead frame, flex circuit, FR4, ABS, and LCP
- Withstand moisture, heat and shock
- One part formulation - no mixing or diluting
- No solvents added
Conformal Coatings for Consumer Electronics PCB Protection
Conformal Coatings for Consumer Electronics PCB Protection
Dymax light-cure conformal coatings have been used to protect printed circuit boards for over 40 years in many high-reliability applications, including military, aerospace, consumer electronics, medical, automotive, appliance, and telecom applications. Our conformal coatings are designed to streamline the assembly process, curing tack free in seconds upon exposure to light. Manufactures can apply, cure, and ship immediately, eliminating time-consuming steps associated with other types of conformal coatings.
Product Number
Product Description
Regional Availability
9-20557
Fluorescing conformal coating designed for rapid coating of PCBs and other electronic assemblies with coating thicknesses between 51 mic [0.002 in] and 510 mic [0.020 in]. This coating cures upon exposure to UV/Visible light and features a secondary heat cure to address shadow areas. UL 94 Flammability V-1 rating.
9451
True black thin protective conformal coating for tamper-proofing PCBs. This product is excellent for hiding components, board features, and sensitive information. Optimized for single-pass coating up to 0.004 in. This coating cures upon exposure to UV/Visible light and has a secondary heat-cure capability. UL 94 Flammability V-0 rating.
9483
High-performance conformal coating that cures tack-free upon exposure to UV/Visible light and then over time with ambient moisture. This product fluoresces bright blue, exhibits excellent corrosion, chemical resistance, and thermal cycling properties. The coating is easily applied from 2-8 mils (0.002 in – 0.008 in) thick to meet the requirements of most automotive PCB designs. UL 94 Flammability V-0 rating.
Product Number
Product Description
Regional Availability
9452-FC
Conformal coating with very low viscosity and no added solvents. This product is LED curable at 365/385/405nm and features a secondary heat cure. This film coating provides good electrical insulation and excellent wettability.
984-LVUF
Low viscosity conformal coating formulated with no solvents added for rapid room-temperature cure when exposed to UV light. This coating has a secondary heat-cure and ultra-high fluorescence. UL 94 Flammability V-1 rating.
9482
Fluorescing conformal coating designed for superior circuit protection with coating thicknesses up to 0.254 mm (0.010 in). This product cures with UV/Visible light first, then over time with a secondary ambient moisture cure. UL 94 Flammability V-0 rating.
9481-E
Formulated to ensure complete cure on high-density PCBs where shadow areas are a concern. This product is optimized for coating thicknesses between 25 mic [0.001 in] and 127 mic [0.005 in] and excels in coating applications where chemical and abrasion resistance is critical. The material cures upon exposure to UV/Visible light and features a secondary moisture cure. UL 94 Flammability V-0 rating.
Need help, use the product finder
Use our formulated product finder to help you find the right material. Interested in learning more or have questions? Contact Us, we want to hear from you.
