Consumer

Protect Electronic Circuitry and Components From Environmental Damage

Dymax offers a wide variety of light-curable structural bonding adhesives and materials suitable for circuit protection and electronic component assembly applications. Many of our light-curable adhesives are electrically insulating and designed for various operations including conformal coating, encapsulation, ruggedizing and reinforcement, thermal management, as well as optical display bonding and lamination. Most materials have multiple-viscosity grades so manufacturers can tailor the material flow to the specific project requirements. The products are used in automotive and consumer electronics and aerospace and defense applications. Many products are one part and have no solvents added.

Features

Excellent adhesion to a variety of substrates
LED, UV, Visible Light curing in seconds
Multiple viscosities available
One part formulations - no mixing or diluting
No solvents added

Categories

Camera Module Assembly

LED and UV light-curable camera module adhesives and materials are utilized for the assembly of smart connected devices, sensors for autonomous driving, and security/industrial camera systems.

Conformal Coatings

Dymax conformal coatings for consumer electronics cure with LED or UV-light and shield against moisture, dust, chemicals, and temperature extremes.

Encapsulation

PCB encapsulants cure in seconds upon exposure to LED, UV, or visible light to protect sensitive components on printed circuit boards including flip chips, wire bonds, bare die, and integrated circuits (IC).

Optical Display Bonding

Dymax optically clear adhesives are designed for applications where durable, crystal-clear, and invisible bonds are needed. Our one-part LCD adhesives are ideal for touch panel assembly including flat panel displays, touch screens, LCD screens, tablets, outdoor display billboards, navigation systems, and more.

Peelable Maskants

SpeedMask peelable maskants for electronics cure in seconds "on demand" when exposed to LED, UV, or visible light. These products are ideal for conformal coating, wave soldering, and reflow operations.

Potting Compounds

Potting compounds cure tack-free in seconds upon exposure to LED or UV/Visible light. Shallow potting and sealing of electronic components and circuitry is also possible in allowing for complete in-line processing and reduced work in progress.

Thermal Interface Materials

Dymax thermal interface materials provide an efficient method of thermal transfer between heat sinks and electronics. The products cure in seconds with LED/UV/visible light, heat, or activator, providing cutting edge performance characteristics with maximum processing convenience.

Dymax light-curable electronic adhesives and encapsulants designed for applications where skin sensitivity or skin proximity is a concern, such as smart glasses.

Wearables Device Assembly

Assemble end-user non-medical grade consumer wearables with adhesives and encapsulants formulated with low-skin-sensitizing ingredients and free from IBOA to address skin sensitivity and skin proximity concerns

Wire Tacking & Ruggedizing

Wire tacking and ruggedizing adhesives cure in seconds upon exposure to LED or UV/Visible light to provide optimal protection of printed circuit board components. The "on-demand" cure makes them ideal for applications such as edge bonding and reinforcement.

Resources

Guide: Electronics Assembly (EN) Guide: Consumer Electronics (EN) Guide: Dispensing Equipment (EN) Guide: Light-Cure Equipment (EN) Guide: Electronics Assembly (Europe|FR) Guide: Electronics Assembly (Europe|DE) Guide: Light-Cure Equipment (Europe|EN) Guide: Dispensing Equipment (Europe|EN) Guide: Dispensing Equipment (Asia|EN) Guide: Light-Cure Equipment (Asia|EN) Guide: Electronics Assembly (Asia|EN)