Edge-Carry UV Curing Conveyor


Cure Light-Curable Adhesives & Coatings from Multiple Sides at Once

Available Globally Except in Europe – Go to CE Marked Conveyors

The Dymax Edge-Carry series of conveyors is designed for efficient curing of UV and/or visible light-sensitive adhesives, inks, and coatings. Parts are transported along rails instead of a traditional conveyor belt. The rails allow light energy to reach multiple sides of the part at once. This is excellent for curing items such as circuit boards that may have components on both sides. These conveyors can be outfitted with a variety of lamp configurations to address a variety of application specific requirements. They offer complete shielding from UV light and consistent cure times. Configuration options allow flexibility when defining intensity requirements to keep operating costs to a minimum. Standard height clearance is 0.75″ across the entire 18″ width, which is ideal for low profile parts such as PCBs, and up to 6 inches across a 13.75″ width, which can be increased to either 8″ or 12″ with optional risers installed.

Features

  • Complete UV shielding
  • Controlled and consistent cure times
  • Adjustable width to 18″
  • Adjustable lamp-to-part distance
  • Built-in variable speed exhaust fan and stack
  • Can be outfitted with either Dymax EC series or Fusion lamps
  • Accurate digital speed control with readout
  • Bench-top conveyor

Choosing the Right Lamp(s) for Your Edge-Carry Conveyor
Edge-Carry series conveyors can be outfitted with Dymax 5000-EC, 2000-EC, and 1200-EC lamps, or Fusion F300 lamps. Edge-Carry lamps are sold separately.

5000-EC Lamps
These lamps provide moderate intensity (~200 mW/cm2) over a 6″ x 6″ (approximate) curing area. Their 400-Watt auto-switching power supplies accept 90 to 264 Volts AC and 47 to 63 Hz. With normal use, 5000-EC bulbs will retain 90% of their original intensity after 1,000 hours. 5000-EC lamps are recommended for small-to-medium throughput bonding applications. For faster or more tack-free cures, Fusion F300 lamps are recommended.

Dymax Edge-Carry series conveyors can be outfitted with one, two, or four 5000-EC lamps as shown below.

One 5000-EC UV lamp center-mounted 6 in wide single exposure

One 5000-EC lamp center mounted
6″ wide single exposure

Two 5000-EC UV lamp center-mounted 6 in wide double exposure

Two 5000-EC lamps center mounted
6″ wide double exposure

Two 5000-EC UV lamps full-width mounted 12 in wide single exposure

Two 5000-EC lamps full-width mounted
12″ wide single exposure

Four 5000-EC UV lamps full-width mounted 12 in wide double exposure

Four 5000-EC lamps full-width mounted
12″ wide double exposure

Take advantage of the opportunity to evaluate our light curing systems for two weeks free of charge through our Try-and-Buy program.

Overall Conveyor Specifications


Maximum Chain Spacing: 18″ (45.7 cm)

Belt Speeds (feet per minute): 1-32 fpm

Max. Parts Height: 6.25″ (15.86)

Overall Dimensions (Not Including Lamps):
59” L x 35” W x 39.5” H (150 cm x 89 cm x 100 cm)

Lamp Adjustment Range: 3.5” – 7.3” (8.9 cm – 18.5 cm)

Images & Diagrams


Dymax Edge-Carry UV Curing Conveyor

Edge-Carry UV Curing Conveyor

Features


  • Offers complete shielding from UV light and consistent cure times
  • Can be outfitted with a variety of lamp configurations to address a variety of application requirements
  • Configuration options allow flexibility when defining intensity requirements to keep operating costs to a minimum
  • Standard height clearance (0.75″ across the entire 18″ width) is ideal for low profile parts such as PCBs
  • Height clearance of up to 6 inches across a 13.75″ width can be increased to either 8″ or 12″ with risers

Models with 5000-EC Lamps


40324
Number of Lamps: 1* 5000-EC, Center Mounted
Width of Illuminated Area: 6″
Max. UVA Intensity (320-390 nm): 200 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 1.25
Shipping Weight with Crates: 390 lbs.
Voltage (VAC): 115V / Amperage: 9.6

40328
Number of Lamps: 2* 5000-EC, Center Mounted
Width of Illuminated Area: 6″
Max. UVA Intensity (320-390 nm): 200 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 1.25
Shipping Weight with Crates: 390 lbs.
Voltage (VAC): 208 – 240V / Amperage: 4.8

40325
Number of Lamps: 2* 5000-EC, Center Mounted
Width of Illuminated Area: 6″
Max. UVA Intensity (320-390 nm): 200 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 2.50
Shipping Weight with Crates: 410 lbs.
Voltage (VAC): 115V / Amperage: 17.6

40329
Number of Lamps: 2* 5000-EC, Center Mounted
Width of Illuminated Area: 6″
Max. UVA Intensity (320-390 nm): 200 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 2.50
Shipping Weight with Crates: 410 lbs.
Voltage (VAC): 208-240V / Amperage: 8.8

40326
Number of Lamps: 2 5000-EC, Full Width
Width of Illuminated Area: 12″
Max. UVA Intensity (320-390 nm): 200 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 1.25
Shipping Weight with Crates: 410 lbs.
Voltage (VAC): 115V / Amperage: 17.6

40275
Number of Lamps: 2 5000-EC, Full Width
Width of Illuminated Area: 12″
Max. UVA Intensity (320-390 nm): 200 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 1.25
Shipping Weight with Crates: 410 lbs.
Voltage (VAC): 208-240V / Amperage: 8.8

40327
Number of Lamps: 4 5000-EC, Full Width
Width of Illuminated Area: 12″
Max. UVA Intensity (320-390 nm): 200 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 2.50
Shipping Weight with Crates: 450 lbs.
Voltage (VAC): 115V / Amperage: 33.6

40331
Number of Lamps: 4 5000-EC, Full Width
Width of Illuminated Area: 12″
Max. UVA Intensity (320-390 nm): 200 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 2.50
Shipping Weight with Crates: 450 lbs.
Voltage (VAC): 208-240V / Amperage: 16.8

*These conveyors have center-mounted lamps that are supplied with removable guides to channel parts into middle 6″ of conveyor.

Models with 2000/1200-EC Lamps


40334 & 40335
Number of Lamps: 1* 2000/1200-EC, Center Mounted
Width of Illuminated Area: 9″
Max. UVA Intensity (320-390 nm): 100 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 0.1
Shipping Weight with Crates: 390 lbs.
Voltage (VAC): 115V or 208-240V

40332 & 40333
Number of Lamps: 1* 2000/1200-EC, Center Mounted
Width of Illuminated Area: 9″
Max. UVA Intensity (320-390 nm): 400 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 0.4
Shipping Weight with Crates: 390 lbs.
Voltage (VAC): 115V or 208-240V

*These conveyors have center-mounted lamps that are supplied with removable guides to channel parts into middle 6″ of conveyor.

Models with Fusion F300 Lamps


40336
Number of Lamps: 1* F300 Lamp, Center Mounted
Width of Illuminated Area: 6″
Max. UVA Intensity (320-390 nm): 2,500 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 2
Shipping Weight with Crates: 475 lbs.
Voltage (VAC): 208-240V
Amperage: 16

40280
Number of Lamps: 2 F300 Lamp, Full Width
Width of Illuminated Area: 12″
Max UVA Intensity (320-390 nm): 2,500 mW/cm2
Max. UVA Energy (320-390 nm) @ 5 fpm (J/cm2): 2
Shipping Weight with Crates: 580 lbs.
Voltage (VAC): 208-240V
Amperage: 32.6

*These conveyors have center-mounted lamps that are supplied with removable guides to channel parts into middle 6″ of conveyor.

**These bulbs are primarily designed for curing UV inks and cationic epoxies.

Edge-Carry Conveyor System
You're viewing: Edge-Carry UV Curing Conveyor
Read more