Plating, Grit Blast, and Heat-Resistant Maskant with See-Cure Technology

Light-curable SpeedMask® 726-SC maskant offers excellent protection during surface finishing of metal components used in aerospace engine, orthopedic implant, and general masking applications. The resins are resistant to plating, anodizing, air-plasma-spray, and grit-blasting, as well as shot-peening processes. Featuring Dymax patented See-Cure technology, the material transitions from blue-to-pink upon exposure to sufficient light energy to indicate when full cure is achieved. The material also has the ability to remain flexible at higher temperature processes up to 204°C [400°F].

The masking resin cures quickly after spraying or dipping and is easily removed by peeling after exposure to heat. A hot-water soak may be used to ease removal. When properly cured, SpeedMask® 726-SC maskant leaves no residue on the surface. The masking compound is recommended for surfaces such as nickel alloys, steel, stainless steel, aluminum, titanium, cobalt, as well as glass.

Dymax materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the ideal balance of UV and visible light for the fastest, deepest cures. SpeedMask® 726-SC maskant is in full compliance with the RoHS2 Directives 2015/863/EU.


Viscosity (nominal):  45,000 cP

Shore Hardness:  D40

Modulus of Elasticity MPa [psi]:  3.9 [560]

Cure Time*:  8 seconds

*Cure time based upon Dymax 5000-EC Light Curing Flood Lamp System (200 mW/cm2)


  • Plating
  • Decorative etching & anodizing
  • Powder coating
  • Part handling
  • Air plasma spray
  • Grit blasting


  • See-Cure technology transitions from blue to pink upon sufficient exposure to light energy
  • UV/Visible light curing
  • Excellent surface protection
  • Fast curing
  • Easy peel-off after exposure to heat
  • Spray or dip
  • Rolls Royce approval as Metal Spray Maskant with designation of OMat 2/240

Compare Curing Equipment


You're viewing: 726-SC
Read more