BlueWave® 200 UV Light-Curing Spot Lamp

High-Intensity Curing with Patented Intensity Adjustment Technology

CE Marked – Available Globally

The BlueWave® 200 version 3.0 is a high-intensity, light-curing spot-lamp system. This unit emits energy in the UVA and visible portion of the spectrum (300-450 nm) for light curing of adhesives, coatings, and encapsulants. Ideally suited for either manual or automated processes, the system contains an integral shutter which can be actuated by a foot pedal or PLC and a universal power input that provides consistent performance at any voltage. A wide range of light guides in various materials and configurations are available for use with this spot-curing unit, providing application flexibility.

The BlueWave® 200’s faceplate design has an operator interface with an easy-to-read LCD display and patented intensity adjustment control. The control  is important for validating an appropriate intensity range and maintaining that range during production. Intensity measurement is easily accomplished with the Dymax ACCU-CAL™ 50 radiometer. Scheduled intensity measurements taken during the production process will indicate whether additional intensity adjustments are required. This method of measurement provides the most accurate readings as they are taken through the lightguide in the actual production setting.

Take advantage of the opportunity to evaluate our light-curing systems for two weeks free of charge through our Try-and-Buy program.


Initial Intensities
Total (280-450 nm) 40+ W/cm2
Visible (400-450 nm) 17+ W/cm2
UVA1 (320-395 nm) 17+ W/cm2
UVB (280-320 nm) 7 W/cm2
Intensity Adjustment Manual from 1% to 100% output
Power Requirements 100-240 VAC, 50-60 Hz, 2.5 Amps
Power Supplies Solid-state, 200 Watt
Bulb 200 Watt metal-halide bulb included; replacement in less than one minute
Reflector Elliptical; glass with dichroic coating to reflect UV and minimize IR
Shutter Timer Digital LCD timer up to 9,999.9 seconds; manual or timed shutter
Shutter Activation Foot pedal or PLC
I/O Port 15 pin D – sub-miniature connector
(PLC Integration)
Inputs: Shutter activate, shutter deactivate, lamp control, PLC enable
Outputs: Unit status, temperature fault, shutter fault, lamp status, power status, shutter status, lightguide status, bulb life warning, bulb life expired
Cooling Filtered fan arrangement; thermally controlled to maintain proper lamp temperature
Hour Meter LCD, monochromatic, 320 x 240 px
Overall Dimensions
(W x D x H)
12.5″ x 12.0″ x 6.5″ (31.8 cm x 30.5 cm x 16.5 cm)
Weight 12.75 lbs. (5.78 kg)
System Warranty One year from purchase
Bulb Warranty Ignition warranted for 2,000 hours
Replacement Bulb Part Number 38465
Part Numbers
North American (120V Standard Plug) 41015    Request a quote
Asian (Type G Power Cord) 41014    Request a quote
Unit With No Power Cord* 41013*  Request a quote

1 As measured with a Dymax ACCU-CAL™ 50 Radiometer (320-395 nm). Excessive on/off cycles and improper cooling may affect bulb degradation an therefore no warranty is expressed or implied.
* For European customers, Dymax Europe will add the appropriate power cord


  • Patented intensity adjustment feature
  • >17,000 mW/cm2 initial intensity
  • Simple to operate and adjust
  • Easy-to-read, lighted front panel LCD display with enhanced unit status and notification displays
  • Improved user interface for easier operation
  • Up to 2,000 hours useful bulb life
  • Wide range of liquid/fiber, single/multi-pole lightguides available
  • Foot pedal or PLC integration
  • Extended exposure time settings to 9,999.9 seconds
  • Controlled power-up sequence ensures proper temperature
  • Integral shutter with digital timer
  • Fast bulb replacement
  • Proprietary “Cool Blue™” filter virtually eliminates lightguide degradation
  • Smooth front panel surface that is easier to clean

Images & Diagrams

BlueWave 200 3.0 Dimensions Drawing – PDF

CAD Files (download):
BlueWave 200 3.0 Model – STEP

BlueWave® 200 UV Light Curing Spot Lamp with Intensity Adjustment and Four Pole Lightguide

BlueWave® 200 3.0 UV Curing Spot Lamp with Intensity Adjustment
Shown with Single-Pole Lightguide

Users can manually adjust intensity using either a removable knob or a screwdriver
BlueWave 200 Light Curing System Diagram

Users can manually adjust intensity using either a removable knob or a screwdriver.

Click to enlarge BlueWave® dimensions

BlueWave 200 UV Spot Lamp
You're viewing: BlueWave® 200 UV Light-Curing Spot Lamp
Read more