Manual: UVC-8 Conveyor
UVC-8 UV Curing Conveyor System
Dymax UVC-8 Versatile Light-Curing Conveyor System with 220-mm Wide Belt
CE Marked - Available in Europe Only
The Dymax UVC-8 Conveyor is designed for curing UV/Visible light-curable adhesives, coatings, and inks. This cost-efficient and versatile conveyor system is perfect for both production and lab environments and can be used in a number of different industries. Typical substrates that are bonded, coated, or encapsulated include paper, plastic, metal, glass, laminated materials, printed circuit boards, and many others.
The UVC-8 Conveyor is equipped with a 220-mm wide PTFE non-stick coated belt and can be outfitted with one, two, or three UV lamps. The distance between the lamp and the belt can be manually adjusted (between 60-100 mm) as well as the belt speed (0.5-12 m/min). This enables the operator to tailor the curing conditions to the specific application. The conveyor also features a digital control panel where various parameters such as operating hours, lamp current, and the UV set point can be monitored.
Features
Features
- Available in Europe only – CE Marked
- Fast cures for higher throughput – intensity up to 800 mW/cm²
- Controlled and consistent cure times
- Adjustable lamp-to-belt distance to accommodate various part heights
- Dependable, heavy-duty conveyor design with fully shielded lamp enclosures
- Digital control panel, compact PLC
- Optional intensity adjustment (40-100%)
- Optional dichromic lamp reflectors and IR filters for curing on temperature-sensitive substrates are available
- Controlled and consistent cure times
- Adjustable lamp-to-belt distance to accommodate various part heights
- Dependable, heavy-duty conveyor design with fully shielded lamp enclosures
- Digital control panel, compact PLC
- Optional intensity adjustment (40-100%)
- Optional dichromic lamp reflectors and IR filters for curing on temperature-sensitive substrates are available
System Specifications
Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.
Get in touch| Property | Specifications |
|---|---|
| Maximum UVA Intensity¹ | 800 mW/cm² |
| UVA Dose (@ 1 m/min) | 2,800 mJ/cm² |
| Lamp Type | Focused Beam |
| Number of Lamps | 1-3 Lamps |
| Illuminated Area (one lamp) | length – 200 mm; width – 200 mm |
| Focal Length | 50 mm |
| Belt Material | 5 mm x 5 mm mesh Teflon-coated fiberglass belt |
| Belt Width | 220 mm |
| Belt Speeds | adjustable from 0.5 to 12 m/minute |
| Electrical Requirements | 3 x 400V/N/PE, 50 Hz |
| Overall Dimensions (L x W x H) | 1,000 mm x 1,100 mm x 1,200 mm |
| Load and Unload Length | 120 mm to max 450 mm |
| Vertical Clearance | adjustable from 60 to 100 mm |
| Net Weight | 180 Kg |
| Lead Time (not including shipping) | 3-4 Weeks |
| Bulb | typical life – 1,000 hours; warranty – 700 hours |
| ¹ | Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer with a new bulb at a distance of 60 mm |
Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.
Get in touchPart Numbers
Build a complete solution or find replacement parts for your project
Limited quantities, please submit RFQ for pricing and availability.
UVC-8 Conveyor Systems
UVC-8
UVC-8 UV Curing Conveyor System with 400-Watt Metal Halide-Standard Bulb (Standard Set-up)
UVC-8/Hg
UVC-8 UV Curing Conveyor System with Mercury (Hg) Bulb (Optional Set-up)
UVC-8/GA
UVC-8 UV Curing Conveyor System with Gallium (GA) Bulb (Optional Set-up)
Replacement Bulbs
UVC-8bulb/Fe
Metal Halide
UVC-8bulb/Ga
Gallium
UVC-8bulb/Hg
Mercury
Radiometers
39560
ACCU-CAL™ 50 for Spot and Flood Lamps and Conveyors
Includes storage/carrying case
39561
ACCU-CAL™ 50 for Flood Lamps and Conveyors
Includes storage/carrying case
Equipment Services
Our experts can provide information about proper equipment care, maintenance, and help you find the right piece of equipment
Learn more