Light-Curing Conveyor Systems with 180° Curing
Cure UV Adhesives and Coatings from the Left, Right, and/or Top
Available Globally (Except Europe)
Dymax UVCS SideCure UV curing conveyors configured with UV curing lamps on the left, right, and/or top offer consistent, fast, and safe UV curing from both the top and/or the sides. These conveyors are designed for 180° curing of UV curable adhesives, UV curable coatings, and UV curable inks. These conveyors can be outfitted with either standard metal halide (longwave), mercury (shortwave), or visible bulbs.
Consistent line speed, consistent lamp height, and consistent intensity together provide a consistent UV curing process. These conveyors do not emit stray UV light and can be outfitted with one to eight moderate-intensity 5000-EC UV flood lamps in the configurations shown further below. Popular end-use applications include UV curing of bonding, masking, and coating applications in the medical, electronics, aerospace, and industrial industries.
Take advantage of the opportunity to evaluate our light curing systems for two weeks free of charge through our Try-and-Buy program.
Maximum UVA Intensity / (320-395 nm)1: 200 mW/cm2
Line Speed: 1 to 27 fpm
Width of Illuminated Area from the Top: 6″ or 12″ (depending on the number and orientation of the 5000-EC UV lamps)
Lamp(s) – 90V to 260V
Conveyor – 120V or 220/230V
Maximum Parts Height: 7″
51″ L x 30″ W x 21.5″ H
(130 cm x 76 cm x 55 cm)
|Part Numbers (Lamps sold separately):|
|SideCure Conveyor with TWO Side-Lamp Openings||39767 (120V)
UV Curing Lamps
Bulb Life: 2,000+ hours with less than 20% degradation (typical)
38560 Metal Halide (Standard)
36970 Mercury (Optional)**
1 Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer.
*These 5000-EC’s are specifically designed for the SideCure. Intensity, footprint, and power requirements are identical, only the connections differ.
**These bulbs are primarily designed for curing UV inks and cationic epoxies.
† These bulbs are primarily designed for curing UV/Visible curing adhesives through UV-blocked, but transparent substrates.
Images & Diagrams
UVCS SideCure UV Curing Conveyor
UVCS SideCure conveyors can be outfitted with ONE to FOUR 5000-EC lamps
ON TOP as shown in the diagrams below. Where 5000-EC lamps are configured in series, the belt speed can be doubled, as compared to a single 5000-EC or two 5000-EC lamps side by side.
SideCure 5000-EC lamps are sold separately.
One 5000-EC UV lamps, center-mounted
Two 5000-EC UV lamps, center-mounted
SideCure Conveyor shown with two 5000-EC UV lamps, center mounted 6″ wide double exposure. Click to enlarge.
Two 5000-EC UV lamps, full-width mounted 12″ wide single exposure
Four 5000-EC UV lamps, full-width mounted 12″ wide double exposure
- Consistent UV curing on the left, right, and/or top – allows for 180° UV curing
- Optical encoder-controlled speed indicator provides for accurate and consistent exposure time
- Can be configured to house 1 to 8 UV curing lamps – versatile and scalable
- Configured with high-intensity 5000-EC lamps which provide 225 mW/cm2 for fast UV curing
- Adjustable side lamps (3″ to 6″ from belt center)
- 12″ belt and 7.5″ vertical clearance allows for curing of large parts
- Small, four-foot-long, bench-top size minimizes the footprint required for UV curing
- Integral cooling and vacuum hold-down
- 1 to 27 fpm
- Complete UV shielding
- Bench-top conveyor (cart optional)