UVCS 2.0 Conveyor w/ Fusion F300 Lamps


12″ Wide UV Curing Conveyors with Fusion F-300s

Not Available in Europe

 

Dymax 12″ wide UV curing conveyors offer consistent, fast, and safe UV curing. These conveyors are designed for UV curing adhesives, coatings, and inks and can be outfitted with either standard metal halide (longwave “D”) or mercury (shortwave “H”) bulbs.

Features

  • Consistent UV curing
  • Complete UV shielding
  • Adjustable lamp to belt distance
  • 4″, 6″, or 10″ vertical clearance
  • Integral cooling and vacuum hold-down
  • 1 to 27 fpm or 25 to 115 fpm
  • 5,000 hour bulb life
  • <2,500 mW/cm2
  • Bench-top conveyor (cart optional)

Consistent line speed, consistent lamp height, and consistent UV output provide a consistent UV cure. These UV conveyors do not emit stray UV light despite utilizing some of the most intense UV curing systems on the market. These conveyors can be outfitted with one or two high-intensity Fusion F300s as shown in the configurations below.

Take advantage of the opportunity to evaluate our light curing systems for two weeks free of charge through our Try-and-Buy program.

Specifications


Maximum UVA Intensity/(320-395 nm)1: 2,500 mW/cm2

Maximum UVA Energy/(320-395 nm) @ 5 fpm: 2.0 J/cm2

Line Speed: 1-27 fpm or 25-115 fpm

Width of Illuminated Area: 6″ (one Fusion F-300) or 12″ (two Fusion F300s)

Voltage: 220/230V (50 or 60 Hz)

Vertical Clearance:
4″ (Standard)
6″ (with 2″ riser, PN 39218)
10″ (with 6″ riser, PN 39280)

Overall Dimensions: 50.5″ L x 29.8″ W x 16.4″ H
(128 cm x 76 cm x 42 cm)

Part Numbers:

12″ Conveyor w/ one Fusion F-300 (6″ wide curing): 39150 (1-27 fpm)  Request a quote

12″ Conveyor w/ two Fusion F-300s (12″ wide curing): 39160 (1-27 fpm)  Request a quote

Bulb Life: 5,000 hours with essentially no degradation

Replacement Bulbs:
36399 Standard “D” bulb, Metal Halide
36441 Optional “H” bulb Mercury*

1 Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer.

*These bulbs are primarily designed for curing UV inks and cationic epoxies.

Images & Diagrams


UV Curing Conveyor with Fusion F-300s

UV Curing Conveyor with Fusion F-300s

 

One Fusion F-300 (for 6

One Fusion F-300
(for 6″ wide curing)
PN 39150

Two Fusion F-300s (for 12

Two Fusion F-300s
(for 12″ wide curing)
PN 39160

UVCS shown with one F-300 UV lamp Click to enlarge

UVCS shown with one F-300 UV lamp. Click to enlarge.

Features


  • Consistent UV curing
  • Complete UV shielding
  • Adjustable lamp to belt distance
  • 4″, 6″, or 10″ vertical clearance
  • Integral cooling and vacuum hold-down
  • 1 to 27 fpm or 25 to 115 fpm
  • 5,000 hour bulb life
  • <2,500 mW/cm2
  • Bench-top conveyor (cart optional)
UVCS UV Conveyor with Fusion Lamps
You're viewing: UVCS 2.0 Conveyor w/ Fusion F300 Lamps
Read more