UVC-8 Förderbandsysteme

Dymax Förderbandsystem UVC-8

CE-Kennzeichnung – Nur in Europa

Das UV-Transportsystem Dymax UVC-8 verfügt über ein 200 mm breites Teflonband und wird mit wahlweise 1 bis 2 UV-Mitteldruckstrahlern (2000 W) und einem IR-Feld ausgestattet. Die Höhe des Strahlers (zwischen 70-120 mm) und die Transportgeschwindigkeit (1-15 m/min) kann variabel angepasst werden. Bei Bedarf können spezielle UV-Reflektoren für die Verarbeitung von temperaturempfindlichen Substraten eingesetzt werden.

Informationen zu anderen Bandausführungen oder weiteren Designoptionen erhalten Sie gerne auf Anfrage.


  • Fast cures for higher throughput – intensity up to 800 mW/cm2
  • Controlled and consistent cure times
  • Adjustable lamp-to-belt distance to accomidate various part heights
  • Dependable, heavy-duty conveyor design with fully shielded lamp enclosures
  • Digital control panel, compact PLC
  • Optional intensity adjustment (40-100%)
  • Optional dichronic lamp reflectors and IR filters for curing on temperature-sensitive substrates are available

The UVC-8 Conveyor is equipped with a 220-mm wide Teflon®-coated belt and can be outfitted with one, two, or three UV lamps. The distance between the lamp and the belt can be manually adjusted (between 60-100 mm) as well as the belt speed (0.5-12 m/min). This enables the operator to tailor the curing conditions to the specific application. The conveyor also features a digital control panel where various parameters such as operating hours, lamp current, and the UV set point can be monitored.


Maximum UVA Intensity1 800 mW/cm2
UVA Dose
(@ 1 m/min)
2,800 mJ/cm2
Lamp Type Focused Beam
Number of Lamps 1-3 Lamps
Illuminated Area
(one lamp)
Length – 200 mm
Width – 200 mm
Focal Length 50 mm
Belt Material 5 mm x 5 mm mesh Teflon®-coated fiberglass belt
Belt Width 220 mm
Belt Speeds Adjustable from 0.5 to 12 m/minute
Electrical Requirements 3 x 400V/N/PE, 50 Hz
Overall Dimensions
(L x W x H)
1,000 mm x 1,100 mm x 1,200 mm
Load and Unload Length 120 mm to max 450 mm
Vertical Clearance Adjustable from 60 to 100 mm
Net Weight 180 Kg
Part Numbers:

UVC-8 with Metal Halide Bulb (std)

UVC-8 with Mercury Bulb

UVC-8 with Gallium Bulb

Part Number: UVC-8 Request a quote

Part Number: UVC-8/Hg Request a quote

Part Number: UVC-8/GA Request a quote

Lead Time
(Not including shipping)
3-4 Weeks
Bulb Life/Warranty Typical life – 1,000 hours
Warranty – 700 hours
Replacement Bulb Part Numbers UVC-8bulb/Fe Metal Halide
UVC-8bulb/Hg Mercury
UVC-8bulb/Ga Gallium

1 Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer witha new bulb at a distance of 60 mm.

Bilder & Diagramme

DYMAX UVC-8 Förderbandsystem

Dymax UVC-8 Förderbandsystem

DYMAX UVC-8 Förderbandsystem

DYMAX UVC-8 Förderbandsystem

DYMAX UVC-8 Förderbandsystem

UVC-8 UV Light-Curing Conveyor System
You're viewing: UVC-8 Förderbandsysteme