WIDECURE Conveyor System
Dymax WIDECURE® Conveyor Systems
Available Globally, Except Europe
The WIDECURE® conveyor system is designed to offer consistent, fast, and safe curing. Equipped with a 25 in-wide belt, this system is ideal for curing light-curable materials on larger parts, or larger quantities of smaller parts. It can be outfitted with either a longwave (metal halide, UVA/Visible) bulb or a shortwave (mercury, UVB/UVC) bulb and delivers up to 700 mW/cm2 of curing energy.
Designed to help manufacturers build a more reliable cure process, the WIDECURE® allows users to easily control various curing parameters through a touch-screen control panel. This feature gives users greater curing flexibility and enables them to tailor the curing conditions to their specific application. The systems tightly controlled belt speed and minimal bulb degradation also allow better control over cure. This provides repeatable curing profiles and a more reliable process with less risk of variance.
Features
Features
- Available globally, except Europe
- Consistent UV curing
- Complete UV shielding
- Touch screen control panel
- 4 in to 24 in adjustable lamp to belt height
- Integral cooling and vacuum hold-down
- 4 to 30 ft/min., adjustable in 0.1 ft/min. increments
- >700 mW/cm²
System Specifications
Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.
Get in touch| Property | Specifications |
|---|---|
| Maximum UVA Intensity (320-395 nm)¹ | 700 mW/cm2 at 4″ |
| Maximum UVA Energy (320-395 nm) @ 5 fpm | 4.0 J/cm² |
| Line Speed | 4-30 fpm |
| Illuminated Width | 24 in |
| System Power | 480 VAC, 3Ø, 60 Hz, 30 Amp. |
| Vertical Clearance | adjustable 4 in to 24 in |
| Overall Dimensions | 113.5 in L x 46 in W x 76 in H (288.3 cm x 116.8 cm x 193 cm) |
| ¹ | Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 160 radiometer. |
Looking for additional technical specifications? Check out our Resource Library or talk with our technical experts.
Get in touchProduct Spotlight: WIDECURE® Light-Curing Conveyor System
How to Replace the Bulb in the WIDECURE® Conveyor
Part Numbers
Build a complete solution or find replacement parts for your project
Limited quantities, please submit RFQ for pricing and availability.
25” WIDECURE UV Conveyor System
41245-L
Standard WIDECURE Conveyor where the belt travels from left to right.
See the specifications section of this page for details.
41245-R
Optional WIDECURE Conveyor where the belt travels from right-to-left. This modified version requires modification charge and additional lead time.
See the specifications section of this page for details.
Replacement Parts & Bulbs
41246
Mercury Bulb (Optional).
These bulbs are primarily designed for curing UV inks and cationic epoxies. This shortwave UVB/UVC Bulb delivers up to 700mW/cm2 of curing energy. Typical bulb life is 750+ hours with less than 20% degradation.
41247
Metal Halide (Standard Bulb)
This longwave standard bulb delivers up to 700mW/cm2 of curing energy. Typical bulb life is 750+ hours with less than 20% degradation.
41248
Replacement Belt
Radiometers
40519
ACCU-CAL™ 50-LED for LED Flood Units: Complete radiometer for LED flood and conveyor systems; includes storage/carrying case
