GA-108


Ultra Light-Weld® Light-Curable FIP/CIP Sticky Black Gasketing Resin

Dymax GA-108 is a UV/Visible light curable Form-In-Place/Cure-In-Place (FIP/CIP) Gasketing Resin that is formulated for electrical enclosures, HVAC ductwork, and automotive casings applications which require a soft, sticky, flexible gasket with low compression set. This gasket material has good adhesion to plastic, metal, and ceramic surfaces.

This resin can be dispensed into intricate and complex component configurations with the added benefit of curing in-line allowing for increased production speed and reduced inventories.

Dymax materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11EC.

Specifications


Durometer Hardness:  00-65

Compression Set % (85°C, 22 hr)** : 41.1

Substrates: Plastics; Metals

Package Sizes Available*:
30 mL Syringe (MR)
160 mL Cartridge
300 mL Cartridge
550 mL Cartridge
15 Liter Tapered Pail

*In Europe materials are sold in g/kg not mL/L
**Compression set is expressed as percentage of deflection per ASTM D395 Method B at 25% deflection. To determine percent recovery, subtract 1/4 of the value from 100%. For example, the recovery is 98.8% with a 5% compression set.

Applications


  • Speaker assembly
  • Electrical enclosures
  • Automotive enclosures
  • Appliance casings
  • HVAC ductwork
  • Automotive door handles

Features


  • UV/Visible light curing
  • Good adhesion to nylon and metals
  • Softest tacky gasket
  • Cures in seconds
  • Silicone free
  • Black in color
  • 45,000 cP nominal viscosity

Compare Curing Equipment


 

Placeholder
You're viewing: GA-108
Read more