Low-Viscosity SpeedMask® Maskant for Plating and Aggressive Processing
SpeedMask® 728-G-LV UV/Visible light-curable maskant offers good surface protection during acid stripping, plating, machining, buffing, polishing, and aggressive grit-blasting finishing processes. The product aids in the manufacture of aerospace, automotive, and consumer mobile device metal components.
This 100% organic masking resin can be sprayed or dipped, cures quickly, and is easily removed with a hot-water soak (140°F-160°F) or ultrasonic bath. The material is acid resistant and protects component substrates such as nickel alloys, steel, titanium, stainless steel, as well as aluminum. 728-G-LV leaves no residue on non-porous surfaces when properly cured with light energy.
Dymax materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the ideal balance of UV and visible light for the fastest, deepest cures. SpeedMask® 728-G-LV is in full compliance with the RoHS2 Directives 2015/863/EU.
Viscosity (nominal): 2,500 cP
Shore Hardness: D50
Modulus of Elasticity MPa [psi]: 293 [42,500]
Cure Time*: 10 seconds
*Cure time based upon Dymax 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
- Acid Stripping
- Grit Blasting
- Shot Peening
- Buffing and Polishing
- UV/Visible light Cure
- Excellent surface protection
- Fast curing
- Easy peel-off after hot-water soak
- Spray and dip dispense options
- High adhesion
- High-visibility green color
- Acid resistant (Nitric, Sulfuric, Hydrochloric)