SpeedMask®

726-SC

Plating, Grit Blast, and Heat-Resistant Maskant with See-Cure Technology


Light-curable SpeedMask® 726-SC maskant offers excellent protection during surface finishing of metal components used in aerospace engines, orthopedic implants, and general masking applications. The resins are resistant to plating, anodizing, air-plasma spray, and grit-blasting, as well as shot-peening processes. Featuring Dymax patented See-Cure technology, the material transitions from blue to pink upon exposure to sufficient light energy to indicate when full cure is achieved. The material also has the ability to remain flexible at higher temperature processes up to 204°C [400°F].

The masking resin cures quickly after spraying or dipping and is easily removed by peeling after exposure to heat. A hot-water soak may be used to ease removal. When properly cured, SpeedMask® 726-SC maskant leaves no residue on the surface. The masking compound is recommended for surfaces such as nickel alloys, steel, stainless steel, aluminum, titanium, cobalt, as well as glass.

Dymax materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the ideal balance of UV and visible light for the fastest, deepest cures. SpeedMask® 726-SC maskant is in full compliance with the RoHS2 Directives 2015/863/EU.

Features

  • Cures with UV/Visible light
  • See Cure - dispenses blue, cures pink upon cure
  • Excellent surface protection
  • Complete under in 8 seconds
  • Easy peel-off after exposure to heat/hot water bath
  • Spray or dip application
  • Rolls Royce approval as metal spray maskant with designation of OMat 2/240
  • Compliant with ISO 10993-5 Cytotoxicity
  • Compliant with with RoHS2 directives 2015/863/EU

Typical Properties

Looking for additional technical specifications. Download a Product Datasheet in our Resource Library or talk with our technical experts.

Get in touch
Property Values
Viscosity (nominal) 52,000 cP
Shore Hardness D40
Modulus of Elasticity 3.9 [560] MPa [psi]
Cure Time* 8 seconds
* Cure time based upon Dymax 5000-EC Light Curing Flood Lamp System (200 mW/cm2)

Looking for additional technical specifications. Download a Product Datasheet in our Resource Library or talk with our technical experts.

Get in touch

Request a Quote

Ready to take the next step? Dymax team member will get back to you shortly.

BCE Application Engineers support all your technical requirements.

Our technical experts are ready to answer any product or application questions you may have

Find your solution
Back to top