UV Light-Curing Flood and Focused Beam Systems

Flood & Focused Beam Systems

UV Light-Curing Flood and Focused Beam Systems

Moderate- to High-Intensity UV/Visible Light for Rapid Curing of UV Adhesives, Coatings, and Inks

A Dymax UV curing system uses moderate- to high-intensity UV/Visible light for the fast curing of UV adhesives, UV coatings and UV inks. A modular UV curing flood lamp consists of a power supply, reflector housing, and standard 400 Watt metal halide bulb. Shutter assemblies, mounting stands, UV shields, and additional UV curing bulbs are available to create a custom UV curing system.

Consistent line speed, lamp height, and intensity together provide a consistent UV curing process. Dymax UV curing conveyors eliminate stray UV light despite utilizing some of the highest-intensity UV curing systems on the market.

  • Longer Bulb Warranty – these bulbs now come with a 2,000 hour warranty!
  • UV cures in 5-30 seconds
  • Worker-friendly UV flood lights
  • Complete bench-top UV curing systems available
  • UV flood lamps come with or without UV shielding and/or UV shutter assemblies
  • UV curing lamps are easily integrated into existing automated assembly systems
  • Longwave, shortwave, and visible UV curing replacement bulbs are available for unique UV curing applications

UV curing flood lights and focused beam flood lamps can be used in a wide variety of industrial applications including UV bonding, UV sealing, and UV encapsulating. Dymax UV curing flood lamp systems are ideal for use in the automotive, electronic, optical, and medical device assembly industries.

UV Light-Curing Flood and Focused Beam Systems

350 mW/cm2; high-intensity 1″ x 6″ focused beam of UV light; tack-free UV cures in 10-30 seconds; rugged brushed-aluminum construction; ideal for UV curing trays of small parts; UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems

Available Globally (Except Europe)

System Shown with ZIP™ Shutter & Light Shield

105 mW/cm2; large 8″ x 8″ curing area; rugged brushed-aluminum construction; ideal for batch processing and the UV curing of large areas; UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems

Available Globally (Except Europe)

System Shown with ZIP™ Shutter & Light Shield

225 mW/cm2; UV cure in 10-30 seconds; Concentrated 5″ x 5″ curing area; Rugged brushed-aluminum construction; Low-cost UV cures for bonded areas larger than 1/2 inch2 or small batch processing; UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems

Available Globally (Except Europe)

System Shown with Standard Mounting Stand

High-intensity LED; 850 mW/cm2 typical at 385 nm; 950 mW/cm2 typical at 405 nm; LED flood array available in 365, 385, and 405 nm wavelength options; Cure times in the 5-30 second range are typical when using Dymax light-curable materials; simple to operate; can be used as a stand-alone system or easily integrated into automated assembly systems

Available Globally – CE-Marked

System Shown with PrimeCure™ Emitter and Emitter Mounting Stand

High-intensity LED; 955 mW/cm2 typical at 385 nm; 1,090 mW/cm2 typical at 405 nm; LED emitter available in 365, 385, and 405 nm wavelength options; emitter delivers a 50 mm x 50 mm active curing area; systems controller can be paired with multiple emitters grouped together to create larger curing pattern matrixes as needed

Available Globally – CE-Marked

ECE 5000 System Shown with ZIP™ Shutter & Light Shield

225 mW/cm2; curing in 5-30 seconds is typical using Dymax light-curable materials; complete protection from UV light makes Dymax flood lamps worker friendly; simple to operate and available with or without shutters; use as bench-top curing systems or integrate into automated assembly systems; flood lamps come with standard 400 Watt metal halide longwave bulbs (shortwave and visible UV curing replacement bulbs are available for unique UV curing applications)

Available Globally – CE-Marked